Build an Orion DC Fan part number.
Make your selections below and then press the Build button to create your part number. |
| Orion DC Fan Part Builder |
OD |
|
|
|
|
|
|
|
|
ORION DC Fan |
|
|
|
|
|
|
|
|
Dimensions / Model Designator
| 2510 - |
25 x 25 x 10mm |
|
8015 - |
80 x 80 x 15mm |
| 3010 - |
30 x 30 x 10mm |
|
8025 - |
80 x 80 x 25mm |
| 4010 - |
40 x 40 x10mm |
|
9225 - |
92 x 92 x 25mm |
| 4020 - |
40 x 40 x 20mm |
|
1225 - |
120 x 120 x 25mm |
| 5010 - |
50 x 50 x 10mm |
|
1232 - |
120 x 120 x 32mm |
| 5210 - |
52 x 52 x 10mm |
|
1238 - |
120 x 120 x 38mm |
| 6015 - |
60 x 60 x 15mm |
|
127 - |
127 x 127 x 38mm |
| 6020 - |
60 x 60 x 20mm |
|
172 - |
172mm dia. x 51mm (round)
or 172 x 150 x 51 (2 flat sides) |
| 6025 - |
60 x 60 x 25mm |
|
|
|
|
|
|
|
|
|
|
Case Designator
| None - |
Part numbers for DC fans smaller than 120mm square do not have case designators. UL94V-0 thermoplastic is standard for DC fans. |
| PT- |
UL94V-0 Thermpoplastic (Standard for DC fans) [Plastic 172mm fans are round] |
| AN - |
Aluminum Natural; polished mill finish (Available for fans that are 120mm or larger |
| AP - |
Aluminum Painted Black finish (Avalable for fans that are 120mm or larger) |
| SAN - |
Stackable, Aluminum, Natural (flat-sided 172mm fans ONLY) |
| SAP - |
Stackable, Aluminum, Painted Black (flat-sided 172mm fans ONLY) |
|
|
|
|
|
|
|
Nominal Operating Voltage
05 - 05VDC
12 - 12VCD
24 - 24VCD
48 - 48VCD
|
|
|
|
|
|
Speed
HH - Ultra-high speed
H - High Speed
M - Medium Speed
L - Low Speed
LL - Ultra-low Speed |
|
|
|
|
Termination
None (Blank) - 12" lead wires
T - Terminal-type fan: Applicable only to DC fans that are 120mm square and larger.
(Terminals require the use of a fan power cord or custom connector.)
|
|
|
|
|
Bearing System
B - Ball Bearing
S - Sleeve Bearing |
|
|
|
Special Function Code
None (Blank) - Standard
| 01 - |
Tachometer Output +5VTTL |
|
12 - |
Alarm and Thermistor |
| 01A - |
Tachometer Output Open Collector |
|
13 - |
Alarm and PWM |
| 02 - |
Alarm Output |
|
14 - |
Alarm and Temperature Sensor |
| 03 - |
Thermistor Spped Control (On hub) |
|
15 - |
Tachometer and Alarm and PWM |
| 04 - |
Thermistor Speed Control (On lead wire. Thermistor not included. |
|
16 - |
Tachometer and Alarm and Thermistor |
| 05 - |
PWM (Pulse Width Modulation) Input |
|
17 - |
Extra long lead wires |
| 06 - |
Dual Speed |
|
18 - |
Metal Impeller |
| 07 - |
Temperature Sensor |
|
19 - |
-40C ~ 90C (Extended Temperature Range) |
| 08 - |
Tachometer and Alarm |
|
20 - |
Conformal Coating |
| 09 - |
Tachometer and Thermistor |
|
21 - |
Customer Specified Modification |
| 10 - |
Tachometer and PWM |
|
051 |
- Constant Speed 20VDC - 90VDC |
| 11 - |
Tachometer and Temperature Sensor |
|
|
|
|
|
| |
|
|
|